Intel Unveils Panther Canyon NUC11 Family: Tiger Lake Comes to NUCs
As part of its CES 2021 announcements, Intel officially unveiled a number of NUCs based on their Tiger Lake SoCs. Intel’s initial NUCs were all based on 100mm x 100mm (4in x 4in) boards, kickstarting the UCFF craze that contributed to revitalizing the PC market. Over the last few years, we have seen Intel expand the NUC to encompass multiple other form-factors, while keeping compactness in mind:
Performance: The original 4×4 UCFF units
Pro: 4×4 UCFF units with expansion support and vPro capabilities
Compute Elements: Add-in Card form factor with carrier boards for system design
Extreme: Compute Elements using a 45W TDP processor with a base board hosting up to three PCIe expansion slots (inclusive of a M.2 22110 NVMe slot) and a 5L chassis enabling compact gaming and workstation PCs
Rugged: NUCs designed for operation in industrial and factory-floor type environments, sporting processors based on the Atom microarchitecture
Essential: 4×4 NUCs sporting processors based on the Atom microarchitecture
Laptop Kit: Reference design / whitebook models for OEMs to bring notebooks to market faster
Enthusiast: Compact PCs with a 5.5in. x 8in. motherboard sporting a discrete GPU (either soldered or in-package)
The Panther Canyon NUCs are the Tiger Lake-based “Performance-class” units, with eleven different SKUs based on three different boards.
All the models operate the Tiger Lake processors (Core i7-1165G7, Core i5-1135G7, or the Core i3-1115G4) with a TDP of 28W. The K and H kits are the usual ones we have seen in previous generations – the latter has support for the installation of a 2.5″ drive. Panther Canyon also has a Q SKU that adds a wireless charging lid (up to 15W) on top of the H chassis. The specifications are summarized in the table below.
Intel Panther Canyon NUC (Tiger Lake-U) Lineup
Model
NUC11PA{K/H/Q}i3
NUC11PA{K/H/Q}i5
NUC11PA{K/H/Q}i7
CPU
Intel Core i3-1115G4
2C/4T
1.7 – 4.1 GHz (3.0 GHz)
12 – 28 W (28W)
Intel Core i5-1135G7
4C/8T
0.9 – 4.2 GHz (2.4 GHz)
12 – 28 W (28W)
Intel Core i7-1165G7
4C/8T
1.2 – 4.7 GHz (2.8 GHz)
12 – 28 W (28W)
GPU
Intel® UHD Graphics for 11th Gen Intel® Processors (48EU) @ 1.25 GHz
Intel® Iris® Xe Graphics (80EU) @ 1.3 GHz
Intel® Iris® Xe Graphics (96EU) @ 1.3 GHz
DRAM
Two DDR4 SO-DIMM slots
Up to 64 GB of DDR4-3200 in dual-channel mode
Motherboard
4.13″ x 4.16″ UCFF
Storage
SSD
1x M.2-2280 (PCIe 4.0 x4 (CPU-direct) or SATA III)
DFF
1 × SATA III Port (for 2.5″ drive)
Card Slots
Full-sized SDXC UHS-II
Wireless
Intel Wi-Fi 6 AX201
2×2 802.11ax Wi-Fi + Bluetooth 5.1 module
Ethernet
1 × 2.5 GbE port (Intel I225-V)
USB
Front
1 × USB 3.2 Gen 2 Type-A
1 x Thunderbolt 3 Type-C
Rear
2 × USB 3.2 Gen 2 Type-A
1 × Thunderbolt 3
Display Outputs
1 × HDMI 2.0b
1 x mini-DP 1.4a
2 × DisplayPort 1.4 (using Thunderbolt 3 Type-C ports)
Audio
1 × 3.5mm audio jack (Realtek)
PSU
External (90W)
External (120W)
Dimensions
Length: 117 mm
Width: 112 mm
Height: 38mm (K), 51mm (H), 56mm (Q)
MSRP
?
?
?
Intel’s technical product specifications provide additional details on the I/Os. We see the front and rear Thunderbolt ports (curiously, marketed as Thunderbolt 3 instead of Thunderbolt 4) are enabled directly from the TGL-U processor. Two display outputs (DP 1.4a) are also routed through these Thunderbolt ports within the processor itself.
Interestingly, a protocol converter is still needed on the board to convert the DP 1.4a display output to HDMI 2.0b. There is a PCIe 4.0 x4 lanes set for attaching a NVMe SSD. The high-speed I/O lanes are multiplexed with a SATA port allowing the installation of a M.2 SATA SSD in the same slot. The LAN port is enabled by the i225-V 2.5 Gbps controller, while the SDXC card slot on the side requires an additional SDXC bridge chip. The Wi-Fi 6 capabilities are enabled by the soldered Intel AX201 CNVi card.
Panther Canyon looks to be a solid upgrade over the Frost Canyon NUC despite the loss of a couple of cores (the Frost Canyon NUC was a hexa-core affair), thanks to the improved CPU microarchitecture and a host of system-level upgrades. On the latter front, we have an additional Thunderbolt port, a 2.5 Gbps LAN port (compared to the regular Gigabit port in the Frost Canyon NUC), ability to install a PCIe 4.0 NVMe SSD, and the ability to drive up to four 4Kp60 displays. Additionally, we also have some of the Panther Canyon SKUs sporting a 15W wireless charging lid.
Various reseller listings have come up for the Panther Canyon NUCs in Europe. However, Intel has not provided a concrete launch date or pricing details for any of the SKUs yet.Read MoreAnandTech